Zhejiang Delong Teflon And Plastic Technology Co.,Ltd
+86-572-8837389
Products
Hot Products
Home > News > Content

PTFE/Teflon / PP/PE/PVC Moulding Moulded Plastic Sheet


Product Description

1. Feature:

Teflon plate is produced by suspend Teflon resin after moulding. In known plastic, it has the best ability to anti chemistry corrosion, and non-aging, and can be used under -180C~ +260Ctemperature without load, and it has the lowest friction coefficients in known solid materials.

2. Usage:

Anti-corrosion liner materials and sealed liner, bearing slide, guide rail, electric isolation part

3. Specification:
Length(mm)*width(mm) thickness(mm)
Nominal tolerance
150*150 1.0~100 0.30~0.50
250*250 1.5~100 0.30~0.50
300*300 1.5~100 0.30~0.50
450*450 1.5~100 0.30~0.50
600*600 2~100 0.30~0.50
800*800 2~100 0.30~0.50
1000*1000 3~100 0.30~0.50
1200*1200 3~100 0.30~0.50
1600*1600 5~40 0.40~0.80
1000*2000 5~40 0.40~0.80
1800*1800 5~40 0.40~0.80
2000*2000 5-40 0.40-0.80
4 data:
Main properties: Plate

Properties unit result
Apparent density g/cm3 2.10-2.30
Tensile strength(min) Mpa 15.0
Crack elongation % 150
Dielectric strength(min) Kv/mm 10

Properties unit  result
 
 Apparent density  g/cm3 2.10-2.30
 
 Tensile strength(min) Mpa 15.0
 
 Crack elongation % 150
 
 Dielectric strength(min) Kv/mm 10